List of Roofing Materials
ROOFING MATERIAL MANUFACTURER'S WARRANTY LIFE EXPECTANCY
RELATIVE COST (LOW=1 HIGH=10) SPECIAL MAINTENANCE
REQUIREMENTS FIRE RATING COMMENTS
20-year composition 3 Tab shingles |
20 years |
20+ years |
1 |
None |
Class A - good |
Economic fiberglass product some
are resistant to moss |
25-year composition |
25 years |
25+ years |
2 |
None |
Class A - good |
Upgraded 20-year version, good choice
for roofing over existing material. |
Architectural grade composition 25-40 |
25-40 years |
30-45 years |
2-4 |
None |
Class A - good |
The variety of styles and textures
makes this product very popular. |
Cedar Shake (Medium and Heavy) |
Generally none |
8-25 years |
5-6 |
Repair, clean and treat with wood
preservative every 3-5 years |
None - can be ordered with fire retardant |
Requires careful selection of materials
and workmanship. High maintenance cost. |
Treated Cedar Shake (Medium and Heavy) |
Generally none |
25+ |
6-7 |
None |
None |
If you must have cedar, this may
be the best way to go. Treated with a preservative
or a fire retardant. |
Standing Seam Metal |
20-50 years |
20-50 years |
5-7 |
None |
None - noncombustible |
Made out of steel and/or aluminum.
Factory painted in various colors. Very good
for heavy weather locations. |
Metal - Exposed fastener |
20 years |
20+ years |
4 |
None |
none - noncombustible |
Tends to hold debris and deteriorate
at fasteners. |
Concrete shakes and Tile |
50-60 years |
50+ years |
5-6 |
None |
Noncombustible |
Several styles are available. |
Hot tar |
Generally none |
10-20 years |
3 |
Seal coat every 5 years |
none |
Best on low sloped roofs. |
Torch down |
10-12 years |
10-20 years |
3 |
Re coat every 5 years |
Generally none |
Best for flat or low sloped roofs. |
Natural slate |
None |
50-150 years |
10 |
Leave it alone |
Noncombustible |
An excellent roofing product, but
not all slate will stand up to our climate. |
|
|
|
These products have
stood the test of time and are backed by exceptional
factory warranties. There are less expensive roofing
materials that would provide a higher profit margin
but would tend to curl in as little as 3-5 years.
That is certainly not the type product we promote
among our customers.
IMPORTANT
ROOFING RELATED DETAILS
While
the selection of contractors and materials
is very important, so is attention to some
important related details. Before a new roof
is installed the following items should be
inspected and, if necessary repaired or replaced:
-
The chimney and chimney flashing
-
Skylights
-
Gutters, down spouts and
drains
-
Roof vents including vents
for various fans and kitchen hoods
-
The siding at dormers
-
Overhanging tree limbs
-
The electrical strike and
wires
-
Insulation in roof structures
without an attic access
Repair
or replacement of these items is usually
easier before or during the roofing process.
Glossary of Terms
|
|
FREE
ESTIMATES!
Our
philosophy is to install the best roof possible
in every situation. We pride ourselves on developing
a long-term working relationship with each
home owner and building owner to make sure
that the selected roof system is a good fit.
For this reason, Dal-Roof Service has selected
a number of quality roofing systems which will
meet the varied roofing needs in today's environment.
Please Email for more information,
comments or suggestions to,
Dal-Roof Service
FREE ESTIMATES for leaks, new roofs, repairs, leaking
skylights, etc. |
|
Please send
any comments or suggestions to, Dal-Roof
Service , or for more information, free estimates
for leaks, new roofs, repairs, skylights, etc.